Influence of the Cam Form on the Structural Parameters of Interlock Knit Fabric

Authors

  • Zlata Pentek Faculty of Textile Technology University of Zagreb, Department of Textile Mechanical Technology, Zagreb, Croatia
  • Miroslav Srdjak Faculty of Textile Technology University of Zagreb, Department of Textile Mechanical Technology, Zagreb, Croatia

Abstract

The influence of knitting speed, yarn type and cam form on the structure and the relaxation time of interlock knit fabric were examined. Three cotton yarns 20 tex with different characteristics were used as samples. The samples were knitted on two interlock knitting machines with a linear cam and 48 knitting systems as well as with unlinear cam and 108 knitting systems. All most significant parameters of knit structure were analyzed. The results, which were treated by a factor plan trial, show that only the cam form has an influence on the parameters considered with the probability 0.02.

Downloads

Published

1994-05-31

Issue

Vol. 43 No. 5 (1994)

Section

Original scientific paper

License

Copyright (c) 1994 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]
Pentek, Z. and Srdjak, M. 1994. Influence of the Cam Form on the Structural Parameters of Interlock Knit Fabric. Tekstil. 43, 5 (May 1994), 221–231.

Most read articles by the same author(s)

<< < 1 2 3 > >>