News in the field of spinning long hair fibers

Authors

Petar Perić Faculty of Textile Technology University of Zagreb, Department of Textile Mechanical Technology, Zagreb, Croatia

Downloads

PDF (Croatian)

Published

1992-12-31

Issue

Vol. 41 No. 12 (1992)

Section

Reports

License

Copyright (c) 1992 Hrvatski inženjerski savez tekstilaca

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

How to Cite

[1]

Perić, P. 1992. News in the field of spinning long hair fibers. Tekstil. 41, 12 (Dec. 1992), 611–616.

Download Citation

Most read articles by the same author(s)

Zlatko Vrljičak, Miroslav Srdjak, Petar Perić, Željko Penava, Changes of Yarn Properties in the Process of Knitting , Tekstil: Vol. 42 No. 6 (1993)
Zenun Skenderi, Petar Perić, Miroslav Srdjak, Influence of Twist Factor on Tensile Characteristics of Combed Cotton Yarn , Tekstil: Vol. 54 No. 11 (2005)
Zenun Skenderi, Petar Perić, Vladimir Orešković, Cotton Yarn Deformation under the lnfluence of Tensile Force , Tekstil: Vol. 41 No. 8 (1992)
Zenun Skenderi, Petar Perić, Vladimir Orešković, Damir Vitez, Resistance of Cotton Yarn to Drawing as a Function of Twist Coefficient , Tekstil: Vol. 44 No. 12 (1995)
Zenun Skenderi, Petar Perić, Vladimir Orešković, Influence of the Number of Fibres in the Cross Section on the Properties of Cotton Yarn , Tekstil: Vol. 38 No. 12 (1989)
Zenun Skenderi, Petar Perić, Control and Information Systems in the Spinning Mill , Tekstil: Vol. 44 No. 1 (1995)
Petar Perić, Zenun Skenderi, Cotton Yams in the knitwear manufacture , Tekstil: Vol. 43 No. 5 (1994)
Budimir Mijović, Zenun Skenderi, Petar Perić, Flexible System for Preparation of Yarn Manufacture , Tekstil: Vol. 49 No. 1 (2000)
Zenun Skenderi, Petar Perić, Vladimir Orešković, Influence of Tensile Force on the Change of Cotton Yarn Diameter , Tekstil: Vol. 40 No. 11 (1991)
Momir Nikolić, Petar Perić, Influence Exerted by Technological Development on the Humanization of Work in the Spinning Mill , Tekstil: Vol. 37 No. 11 (1988)

1 2 > >>